Reviewed by Bertazzoni Repair Editorial Team · Last reviewed August 12, 2026
Written by
Bertazzoni Repair Editorial Team Editorial TeamPublished August 10, 2026Updated October 28, 2026Technically reviewed August 12, 2026
Error codeF2 / F02
ApplianceDishwasher
Quick answer
F2 says the dishwasher cannot get rid of its water. Hose and filters first, then service.
Model compatibility: Bertazzoni reuses codes across series and model years, so F2 / F02 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
F2 reports inability to discharge water; a clogged hose or filters may be the reason.
Quick answers on F2
What does it signify? Bertazzoni lists F2, or F02, as the dishwasher being unable to discharge water.
At a glance
Code
F2 / F02
What it means
F2 reports inability to discharge water; a clogged hose or filters may be the reason.
What you can check
Switch the dishwasher off, then clear the drain hose and filters, taking care with hot water and sharp fragments. Cancel the program and run another one to see whether the code returns.
When to call a technician
If F2 comes back after the hose and filters are clear, a technician should examine the rest of the drain path.
What are the manual lines? Three: the hose and filters used for discharge may be clogged; cancel the program; contact service if the error carries on.
How can I tell it carries on? The code reappears after you start another program following your clean-out of the hose and filters.
Does cancelling drain the tub? Not according to the manual, which is silent. Look inside afterwards, as some water may remain.
Before you reach inside
Switch the dishwasher off. The water may be hot and the sump can hold sharp fragments. By drain hose the table means the corrugated line leading to the sink drain or disposer.
End of the owner steps
No pump test or other check is given. Once the hose and filters are clear, service is the answer.
Where the error stays
If F2 is still displayed after the hose and filters are clear, the next step is to contact service, and a technician can examine the rest of the drain path.
Compare
E1: the code about water arriving, from the E-code manuals
Bertazzoni dishwasher service reaches the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 755-5986 with the F2 code, the model and a note of what you cleared.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Bertazzoni appliance?
Book a specialist visit for a clear estimate and approval before any repair.