Reviewed by Bertazzoni Repair Editorial Team · Last reviewed August 12, 2026
Written by
Bertazzoni Repair Editorial Team Editorial TeamPublished August 10, 2026Updated October 28, 2026Technically reviewed August 12, 2026
Error codeE7 / E07
ApplianceDishwasher
Quick answer
E7 is the short-circuit entry for the thermal sensor, with three checks listed.
Model compatibility: Bertazzoni reuses codes across series and model years, so E7 / E07 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
E7 is the thermal sensor short circuit code on Bertazzoni dishwashers.
Questions about E7
What does E7 stand for? The DW24PR and DW18PR manuals say thermal sensor short. Some lists write it E07.
At a glance
Code
E7 / E07
What it means
E7 is the thermal sensor short circuit code on Bertazzoni dishwashers.
What you can check
Cancel the cycle and switch the dishwasher off at the plug or breaker. Do not open the machine to test the thermistor yourself, because no owner reset exists.
When to call a technician
Book a technician to look at the inlet water temperature, the thermistor and the control board. Testing the sensor is not something you can do safely.
Does the manual say how to reset it? No. It gives no cause and no reset.
Is it the same as E6? It concerns the same sensor, but the manual lists E6 as a cut and E7 as a short.
The checks in the manual
Under the fault the manuals list three items: look at the temperature of the water coming in, look at the thermistor, and look at the PCB. These are the same items given for E6.
Sensible handling
Cancel the cycle.
Switch the dishwasher off at the plug or breaker.
Do not open the machine to test the thermistor yourself; that is a technician’s job.
In brief
E7 is the thermal sensor short circuit entry, taken from the DW24PR and DW18PR use and care manuals. Under it they list inlet water temperature, thermistor and PCB, which are the same items shown for E6, and they print no cause or reset. Cancelling the program and cutting power is the owner’s part. Testing the thermistor is not.
Codes to compare
E6: thermal sensor cut, the open-circuit counterpart
F6: faulty heater sensor in the newer F-code tables
Dishwasher service across our metro areas
Bertazzoni dishwasher service is available in the Miami, New York, Houston, Los Angeles and San Diego metro areas; call (844) 755-5986. Read out the E7 code and the model number, and say whether the machine is already unplugged.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Bertazzoni appliance?
Book a specialist visit for a clear estimate and approval before any repair.