Skip to content
Specialized Bertazzoni repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Bertazzoni Dishwasher Code E6: Sensor Open Circuit

Error code E6
Appliance Dishwasher
Quick answer

Bertazzoni dishwasher E6: thermal sensor cut, an open circuit.

Model compatibility: Bertazzoni reuses codes across series and model years, so E6 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

The dishwasher board sees its thermal sensor as cut, an open circuit.

E6, sometimes printed E06, is the code Bertazzoni gives to a cut thermal sensor on its DW24PR and DW18PR dishwashers.

At a glance

Code E6
What it means The dishwasher board sees its thermal sensor as cut, an open circuit.
What you can check There is no owner repair for E6. Cancel the program, leave the machine closed, and mention whether the hot water supply seemed normal when the code appeared.
When to call a technician A technician should check the inlet water temperature, the thermistor and the control board, since those checks are not owner work.

How to picture it

An open circuit leaves no path for current, like a wire to the sensor that has snapped. That is how the control board interprets the reading.

Listed checks

  • Inlet water temperature
  • Thermistor
  • PCB

Those items are common to E7, where the sensor is read as shorted and current bypasses it.

Factory mode remark

Near these rows the table also reads “only appeared in the factory mode”. Which of them it describes is uncertain.

Owner role

The inlet water temperature is listed as the first thing to check, and a technician makes that check. Cancel the program, do not open the machine, and mention whether the hot supply seemed normal at the time. The baseline from the incoming water is what the sensor reading is compared against.

Related

  • E7: the short-circuit version of this sensor fault
  • E3: heating not reaching the set temperature in 90 minutes

Models and spelling

The code is printed in the DW24PR and DW18PR manuals. Some lists write it E06; it is the same code.

The open-versus-short distinction is the only difference between E6 and E7. Their checks match, so a technician starts in the same place for either.

Dishwasher sensor service in metro areas

Bertazzoni dishwasher sensor faults are handled in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 755-5986 with the E6 code and the model number; the dishwasher service page has more.

Source: Bertazzoni DW24PR Use & Care Manual; Bertazzoni DW18PR Use & Care Manual

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Bertazzoni appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Book your repair

Ready to get your Bertazzoni appliance working again?

Book online or call us — clear estimates, approval before any work, and a workmanship warranty on every completed repair.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair