Reviewed by Bertazzoni Repair Editorial Team · Last reviewed August 12, 2026
Written by
Bertazzoni Repair Editorial Team Editorial TeamPublished August 10, 2026Updated October 28, 2026Technically reviewed August 12, 2026
Error codeE1
ApplianceDishwasher
Quick answer
A Bertazzoni dishwasher showing E1 took too long to fill. Check the faucet, intake and pressure.
Model compatibility: Bertazzoni reuses codes across series and model years, so E1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
E1 is a longer-than-expected water inlet: faucet not open, intake restricted, or water pressure too low.
A dishwasher watches the clock while it fills. E1 on a Bertazzoni unit means the fill ran long, and the manuals for the DW24XV, DW24PR and DW18PR describe it with the same rule.
At a glance
Code
E1
What it means
E1 is a longer-than-expected water inlet: faucet not open, intake restricted, or water pressure too low.
What you can check
Fully open the water shut-off valve and restart the cycle. That is the only owner step for this code, so check it before anything else.
When to call a technician
If the tap is open and E1 returns, a technician needs to review the water supply, inlet valve, flow meter, pressure switch and control board.
The 4-minute rule
Four minutes into the inlet step, if the flow meter has not picked up the defined quantity of water, the machine signals E1. You may see it written E01.
Cause and check
Listed cause
What to look at
Faucet not open
The supply shut-off valve
Water intake restricted
The intake path
Water pressure too low
The supply pressure
The DW24PR manual shows a water failure indicator on its display for the closed-faucet case.
What service reviews
the water supply, then the inlet valve
the inlet and the flow meter
the pressure switch and the drain
the PCB, last on the list
Owners can handle only the first step: fully open the shut-off valve and restart the cycle.
Is E1 a leak? No. A leak is a different code; E1 is about water arriving too slowly or not at all within the allowed time.
Is a part named for the owner? The three listed causes concern the supply, not a component, and the seven-item list is for service.
Dishwasher service in metro areas
If the tap is open and E1 returns, phone (844) 755-5986. Bertazzoni dishwasher service covers the Miami, New York, Houston, Los Angeles and San Diego metro areas; the dishwasher service page lists what we do. Tell us the model and what you tried.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Bertazzoni appliance?
Book a specialist visit for a clear estimate and approval before any repair.