Skip to content
Specialized Bertazzoni repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Bertazzoni Dishwasher FF Code: Inlet System Failure

Error code FF
Appliance Dishwasher
Quick answer

FF reports a water inlet system failure, with tap and hose filter checks listed.

Model compatibility: Bertazzoni reuses codes across series and model years, so FF may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

FF is the water inlet system failure code on Bertazzoni dishwashers.

When FF appears, a Bertazzoni dishwasher has concluded that water is not coming in as expected. The fault table words it water inlet system failure, and the same entry shows up in the 18 inch and 24 inch manuals checked.

At a glance

Code FF
What it means FF is the water inlet system failure code on Bertazzoni dishwashers.
What you can check Make sure the inlet tap is open and water actually runs, then clean the filter in the inlet hose. Shut the tap first, keep a towel under the connection, and tighten the hose firmly afterward.
When to call a technician If FF is still there after the tap and hose filter checks, have a technician look. Anything behind the inlet connection means opening the dishwasher with the power off.

Questions about FF

What should I look at? The inlet tap first: is it open, and does water actually run? Then the filter in the inlet hose.

How is the filter cleaned? The hose comes off the tap and the filter inside is cleaned. It is a screen that catches grit. Shut the tap before starting, keep a towel under the connection, and tighten the hose firmly before turning the water back on.

What if FF is still there? Contact service. Apart from the tap and the hose filter, no causes are listed in the manual.

Inside the machine

Whatever lies behind the inlet connection means opening the dishwasher, which is technician work with the power off.

Quick reference

Where Step
Tap Open, with real flow
Inlet hose Disconnect and clean the filter
FF persists Contact service instead of retrying

The manual lists these steps in that order. The model and serial number are on the label at the right side of the inner door.

Nearby codes

  • E1: slow filling in the E-code manuals
  • F3: water that will not stop entering

Dishwasher repair in the metro areas we cover

Bertazzoni dishwasher service reaches the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 755-5986 with the FF code, the model and serial number from the label on the right side of the inner door, and a note of what you checked.

Source: Bertazzoni DW24T3IXT26 / DW24T3IPT26 dishwasher manual; Bertazzoni DW18S2IXV / DW18S2IPV dishwasher manual; Bertazzoni DW24T3IXV / DW24T3IPV dishwasher manual

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Bertazzoni appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Book your repair

Ready to get your Bertazzoni appliance working again?

Book online or call us — clear estimates, approval before any work, and a workmanship warranty on every completed repair.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair