Bertazzoni cooktop code F3 means the coil temperature sensor has failed.
Model compatibility: Bertazzoni reuses codes across series and model years, so F3 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
A coil temperature sensor failure on the induction cooktop, shown with E on the zone indicator.
F3 is the code in Bertazzoni’s induction hob manual for a failure of the coil temperature sensor, with E on the zone indicator.
At a glance
Code
F3
What it means
A coil temperature sensor failure on the induction cooktop, shown with E on the zone indicator.
What you can check
Switch the cooktop off at the supply, leave the affected zone unused, write down which zone shows E, and do not lift the glass. No reset exists.
When to call a technician
A technician must remove the glass to replace the coil sensor. Ask whether the remaining zones are fine to use before cooking on them.
The table row
Fault
Coil temperature sensor failure
Remedy
Replace the coil sensor
Zone indicator
E
Causes are not listed. The remedy implies the sensor itself is what failed.
What owners should and should not do
Switch the cooktop off at the supply and leave the zone unused.
Write down which zone shows E.
Do not lift the glass. Bertazzoni cautions that dismantling the cooktop can cause danger and damage.
The code has no reset, and the text does not connect it with cooling down.
Who replaces it
A technician removes the glass to reach the sensor by the coil. Whether the remaining zones may be used is not covered by the manual.
F3 versus E5
Both show E on the zone indicator and both are sensor failures. E5 lists a cable or assembly cause; F3 names the coil sensor.
What about the zones without an E? Nothing is said in the manual. Only the zone showing E is marked, so keep that one idle and ask the technician whether the rest are fine to use.
Is there a reset? None is listed, and cooling down is not mentioned for F3.
Service across the metro areas
Bertazzoni induction cooktop service is available in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 755-5986 and mention F3 and the model; the cooktop service page has the details.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Bertazzoni appliance?
Book a specialist visit for a clear estimate and approval before any repair.