Skip to content
Specialized Bertazzoni repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Bertazzoni Cooktop Code ER03: Controls Blocked

Error code ER03
Appliance Cooktop
Quick answer

Bertazzoni ER03 shuts the cooktop off when the controls are covered or a button is held about 10 seconds.

Model compatibility: Bertazzoni reuses codes across series and model years, so ER03 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

The induction cooktop protected itself against unintended operation, often because water, a pan, or a held button was on the controls.

Think of ER03 as the cooktop declining to run unattended input. The manuals name it protection against unintended operation.

At a glance

Code ER03
What it means The induction cooktop protected itself against unintended operation, often because water, a pan, or a held button was on the controls.
What you can check Take any pan or water off the glass, clean the control area, and replace a missing or unsuitable pot, then try again. A hot-surface indicator that alternates with the code only means the glass is warm.
When to call a technician If ER03 persists on a clean control area with nothing on the glass, have a technician look at the cooktop, since no further owner steps are known.

How it plays out

The first Bertazzoni manual says a button pressed for about 10 seconds makes the cooktop shut off, give an audible error signal and display ER03. It lists the likely triggers as no pot or an unsuitable pot, and water or a pot on the glass over the controls. The PE244HB, PE304HB and PE365HB manual puts it as water or pans on the user interface and a switch-off after 10 seconds.

Trigger and remedy

Trigger Remedy in the manuals
Unsuitable or missing pot Replace the pot
Water on the control area Clean the user interface
Water or pans on the glass Remove them from the glass

A display detail

If the hob is still hot, the hot-surface indicator and the error code take turns on the display. It is a sign that the glass is warm and says nothing about the fault.

After you have tried these

Nothing more is listed for owners. The PE manual says ER codes concern the entire hob.

See also

  • ER21: the control glass sensor detected excess heat and the hob stopped
  • F1: a lost link between the display board and left mainboard

Questions

Is ER03 a breakdown? It is described as a protection, and most of the triggers named are things on the glass or in the way a pot sits.

Which hobs list it? It appears in the P905 manual and also in the one for PE244HB, PE304HB and PE365HB.

Cooktop service by metro area

If ER03 persists on a clean control area, phone (844) 755-5986. We take Bertazzoni cooktop calls from the Miami, New York, Houston, Los Angeles and San Diego metro areas; see the cooktop service page and have your model number ready.

Source: Bertazzoni induction hob manual (P905I2M30NVS); Bertazzoni induction cooktop manual (PE244HB / PE304HB / PE365HB)

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Bertazzoni appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Book your repair

Ready to get your Bertazzoni appliance working again?

Book online or call us — clear estimates, approval before any work, and a workmanship warranty on every completed repair.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair