Reviewed by Bertazzoni Repair Editorial Team · Last reviewed August 12, 2026
Written by
Bertazzoni Repair Editorial Team Editorial TeamPublished August 10, 2026Updated October 28, 2026Technically reviewed August 12, 2026
Error codeE4
ApplianceCooktop
Quick answer
A Bertazzoni cooktop showing E4 has found its supply voltage too low.
Model compatibility: Bertazzoni reuses codes across series and model years, so E4 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
The induction cooktop reports an abnormal supply voltage that is too low.
On a Bertazzoni induction hob, E4 follows E3 in the table and covers the opposite supply fault: voltage that is too low.
At a glance
Code
E4
What it means
The induction cooktop reports an abnormal supply voltage that is too low.
What you can check
Notice whether lights and other appliances are affected, and whether the code appeared at switch-on or mid-cook. If the supply appears normal, power the cooktop on again.
When to call a technician
If E4 returns while the supply seems normal, keep the cooktop off. A qualified person should test the supply and connection; do not disassemble the hob.
Table entry
Shown
E4
Fault
Abnormal supply voltage (too low)
Remedy
Inspect whether the power supply is normal; power on after it is normal
The table gives no part, no cause, and no definition of how low counts as too low or for how long.
Things an owner may note
Is only the cooktop affected, or are lights and other appliances too?
Did E4 appear at switch-on or mid-cook?
Where to stop
Supply testing and any work on the connection to the cooktop go to a qualified person. The manual also says not to disassemble the hob. Keep the cooktop off if the code is back and the supply appears normal.
Frequent questions
Does E4 mean a failed cooktop? The wording points to the power reaching the unit, not to a broken part.
Because the table is so brief, your own observations carry weight: whether the code showed up as soon as the cooktop was switched on or while cooking, and whether anything else in the kitchen misbehaved at the time. Bring up those two points when you call.
Service for cooktop power problems
We handle Bertazzoni cooktop service in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Ring (844) 755-5986 and share the code plus anything you noticed on other circuits; the cooktop repair page has more.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Bertazzoni appliance?
Book a specialist visit for a clear estimate and approval before any repair.