Skip to content
Specialized Bertazzoni repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Bertazzoni Cooktop Error E5: Sensor Failure

Error code E5
Appliance Cooktop
Quick answer

E5 flags a failed temperature sensor on a Bertazzoni induction cooktop.

Model compatibility: Bertazzoni reuses codes across series and model years, so E5 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

E5 means a temperature sensor on the induction cooktop has failed, and the zone indicator shows E.

The hob cannot trust a sensor that has failed. That is the situation behind E5 on a Bertazzoni induction cooktop, where the cooking zone indicator also shows E.

At a glance

Code E5
What it means E5 means a temperature sensor on the induction cooktop has failed, and the zone indicator shows E.
What you can check Switch the cooktop off at its circuit and do not use it. Record how many zones show the E. There is no owner reset, and the hob should stay closed.
When to call a technician A technician is needed for this code, since the cause is a loose connection cable or a faulty sensor assembly that requires opening the cooktop.

Two possible causes

Cause in the manual Meaning
Connection cable not correctly plugged Signal fails to arrive because a connector is loose
Faulty assembly The sensor assembly does not read properly

What the owner can do

  1. Switch the cooktop off at its circuit.
  2. Do not use it until a technician has been.
  3. Record how many zones show the E.

The manual lists no reset, and owners are told to keep the hob closed, which rules out reseating a cable at home.

E5 compared with E1

E1 is a reading that is too high and ends with a restart after cooling. E5 is a failed sensor and has no restart step.

Related

  • F3: the coil temperature sensor has failed
  • F1: a cable cause is listed for this one as well

What the E on the indicator tells you

Bertazzoni’s table notes that the indicator of the cooking zone shows E with this fault. If you can, observe whether one zone or several carry the letter, because whoever opens the hob will want to know. Nothing else about the display is described for E5.

Cooktop sensor repair across our metro areas

Bertazzoni cooktop sensor faults are handled in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 755-5986, say that E5 is showing, and visit the cooktop repair page for the appliance overview.

Source: Bertazzoni induction hob manual (P905I2M30NVS)

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Bertazzoni appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Book your repair

Ready to get your Bertazzoni appliance working again?

Book online or call us — clear estimates, approval before any work, and a workmanship warranty on every completed repair.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair