Skip to content
Specialized Bertazzoni repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Bertazzoni Dishwasher Code E3: Heat-Up Timeout

Error code E3
Appliance Dishwasher
Quick answer

Bertazzoni DW24PR and DW18PR dishwashers show E3 when heating exceeds 90 minutes.

Model compatibility: Bertazzoni reuses codes across series and model years, so E3 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

The dishwasher could not reach the defined temperature within 90 minutes, so it shows E3.

What E3 says

Code E3 (also printed E03)
Condition Defined temperature not reached after 90 minutes
Manuals DW24PR and DW18PR
Checks listed Heater, thermistor, PCB

The parts in plain words

  1. Heater: warms the wash water.
  2. Thermistor: senses the temperature by a resistance that changes with heat.
  3. PCB: the board that controls heating and reads the thermistor.

Beyond these three lines the manual adds nothing.

At a glance

Code E3
What it means The dishwasher could not reach the defined temperature within 90 minutes, so it shows E3.
What you can check There is no owner fix for E3. Cancel the program, disconnect the dishwasher from power, and note whether the dishes finished hot, since hot water and a live heater are inside.
When to call a technician Treat E3 in ordinary use as a real fault and schedule a technician to check the heater, thermistor and control board.

The factory-mode remark

Close by, the table prints “only appeared in the factory mode”. That wording might attach to E3 or to the row before it, and the manual leaves the matter open. If the code comes in ordinary use, it counts.

Owner position

No owner steps are published. Cancel the program and disconnect the dishwasher from power before anything is examined, since it holds hot water and a live heater. Make a note of whether the dishes finished hot.

Check the sensor codes too

  • E6: thermal sensor open circuit
  • E7: thermal sensor short circuit

The DW24XV table does not include E3.

Questions

Can an owner do anything for E3? No steps are listed for owners.

Does the factory-mode remark change anything? It is unclear which row it covers, so treat an E3 in ordinary use as a real fault and not as something to ignore.

Why mention the dishes? How they finished, hot or not, is useful to whoever inspects the dishwasher afterward.

Dishwasher heating service in our metro areas

Bertazzoni dishwasher heating faults are serviced in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 755-5986 and mention E3 and the model; see the dishwasher service page.

Source: Bertazzoni DW24PR Use & Care Manual; Bertazzoni DW18PR Use & Care Manual

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Bertazzoni appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Book your repair

Ready to get your Bertazzoni appliance working again?

Book online or call us — clear estimates, approval before any work, and a workmanship warranty on every completed repair.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair