Skip to content
Specialized Bertazzoni repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Bertazzoni Dishwasher HI Code: High Voltage

Error code HI
Appliance Dishwasher
Quick answer

HI is the high voltage failure entry. Unplug and contact service.

Model compatibility: Bertazzoni reuses codes across series and model years, so HI may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

HI is the high voltage failure code on Bertazzoni dishwashers, with contact service as the action.

HI is listed in Bertazzoni’s dishwasher manuals as a high voltage failure. The table gives HI exactly one instruction, contact service, and nothing else.

At a glance

Code HI
What it means HI is the high voltage failure code on Bertazzoni dishwashers, with contact service as the action.
What you can check Stop the cycle, note the display, avoid repeated restarts, and switch off the breaker before anyone looks behind the kick panel.
When to call a technician HI needs a technician, since the wiring and junction box are not owner territory. Leave the plug and junction box untouched and have the supply tested.

Questions about HI

Can it be reset? No reset is published.

Is there anything to clean? No part is named.

Is the fault in the wiring, the cord or the machine? The manufacturer does not specify; testing by a technician would settle it.

Is HI like F7? No. F7 is overheating, while HI concerns voltage.

Steps

  1. Halt the cycle and make a note of the display.
  2. Resist repeated restarts on a suspect supply.
  3. Disconnect the dishwasher before anyone looks behind the kick panel, using the breaker if it is hard-wired.
  4. Leave the plug and junction box untouched.

Notes that help a technician

  • HI at switch-on, or midway through a wash
  • Odd behaviour of other lights or appliances on the circuit
  • A recent move or reinstall of the dishwasher

Why caution matters here

A voltage fault concerns the electricity reaching the machine. Wiring and the junction box are for an electrician or technician, and starting cycle after cycle to watch the code gains nothing.

What the table leaves out

It names no part, no cause and no check. Anything beyond stopping, noting the display and disconnecting power is therefore left to service. If you can, mention the model and serial number from the inner door label when you call.

Related

  • F7: overheating
  • F8: heater error

Dishwasher repair in the metro areas we cover

Bertazzoni dishwasher service covers the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 755-5986, say HI, and read the model and serial number from the right-side label on the inner door.

Source: Bertazzoni DW24T3IXT26 / DW24T3IPT26 dishwasher manual; Bertazzoni DW18S2IXV / DW18S2IPV dishwasher manual; Bertazzoni DW24T3IXV / DW24T3IPV dishwasher manual

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Bertazzoni appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Book your repair

Ready to get your Bertazzoni appliance working again?

Book online or call us — clear estimates, approval before any work, and a workmanship warranty on every completed repair.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair