Skip to content
Specialized Bertazzoni repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Bertazzoni Cooktop Error ER21: Controls Overheated

Error code ER21
Appliance Cooktop
Quick answer

A Bertazzoni cooktop displaying ER21 has shut off because the control area got too hot.

Model compatibility: Bertazzoni reuses codes across series and model years, so ER21 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

ER21 appears when the user interface sensor detects over 85 C (185 F) and the cooktop switches itself off.

The question behind ER21 is simple: has something hot been sitting on the touch controls? Bertazzoni’s manuals describe a sensor at the user interface that causes a complete shutdown past 85 C (185 F).

At a glance

Code ER21
What it means ER21 appears when the user interface sensor detects over 85 C (185 F) and the cooktop switches itself off.
What you can check Move whatever hot item is on the controls, wait for the cooling to finish and the error to vanish, then turn the cooktop on again.
When to call a technician If ER21 returns with nothing hot nearby, switch the cooktop off or unplug it and have a qualified technician inspect the thermal insulation of the controls.

Numbers in the manuals

Event Temperature
Full shutdown with ER21 on the display over 85 C (185 F)
Error disappears below 75 C

A line elsewhere in the text refers to restarting under 85 C. The table figure of 75 C is the one used here.

Do this

  1. Move whatever hot item is on the controls.
  2. Wait for the cooling to finish and the error to vanish.
  3. Turn the cooktop on again.

Is anything broken?

Not necessarily. The manuals present ER21 as a protection that lets go as the temperature drops. If it recurs with nothing hot nearby, the table adds another remedy: inspecting the user interface’s thermal insulation. For this the appliance is to be switched off or unplugged from power and passed to a qualified technician.

Next-door codes

  • ER03: controls covered by water or a pan
  • E1: the glass plate sensor on P905 hobs

Where the two manuals agree

Both Bertazzoni manuals that list ER21 give the same two figures, 85 C for the shutdown and 75 C for the error to disappear. Both describe the cause in simple terms as a hot object placed on the interface.

Service in the metro areas we cover

Bertazzoni cooktop ER21 calls from Miami, New York, Houston, Los Angeles and San Diego metro areas go to (844) 755-5986. Share the model number and whether a pan was near the controls; the cooktop repair page describes the service.

Source: Bertazzoni induction cooktop manual (PE244HB / PE304HB / PE365HB); Bertazzoni TFT induction cooktop manual (PE304T / PE365T)

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Bertazzoni appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Book your repair

Ready to get your Bertazzoni appliance working again?

Book online or call us — clear estimates, approval before any work, and a workmanship warranty on every completed repair.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair