Skip to content
Specialized Bertazzoni repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Bertazzoni Dishwasher F8 Code: Heater Error

Error code F8 / F08
Appliance Dishwasher
Quick answer

F8 is a heater error. Contact service is the printed action.

Model compatibility: Bertazzoni reuses codes across series and model years, so F8 / F08 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

F8 is a heater error on the Bertazzoni dishwasher, with contact service as the action.

Questions about F8

What is F8? A heater error. Newer Bertazzoni dishwashers print it F8, and some lists write F08.

At a glance

Code F8 / F08
What it means F8 is a heater error on the Bertazzoni dishwasher, with contact service as the action.
What you can check Cancel the program, unplug the machine, and leave the lower access panel, the element and its wires alone. If water remains in the tub, mention it.
When to call a technician There is no owner fix for F8, so a technician is needed. Report cooler or wetter dishes than usual, and any F6 or F7 that showed.

What is the owner told? Only to contact service. The manual lists no causes, reset or check.

Why no owner repair? The heater works at mains voltage while in contact with water, so it is a technician’s part.

Do I empty the tub? Not requested by the manual. If water remains, say so on the call.

Which models? The same F-code table sits in five manuals: DW24T3, DW24T3 T26, DW18S2, DW24T2 and DW24S3.

Possible signs

Cooler or wetter dishes than usual may show up. The manual draws no link between F8 and that, so report it rather than treating it as a diagnosis.

Checklist

  1. Cancel the program and unplug the machine.
  2. Note the code and model number.
  3. Tell service if F6 or F7 appeared too.
  4. Leave the lower access panel, the element and its wires alone.

The part in question

The heater is what warms the wash water and assists drying. Newer Bertazzoni models report its fault as F8, and the manual lists neither causes nor a reset.

Observations

Cooler or wetter dishes are worth mentioning on the call, though the manual does not tie them to F8.

Linked entries

  • F6: heater sensor fault
  • F7: overheating
  • E3: temperature not reached in 90 minutes

Dishwasher heater repair in the metro areas we cover

Bertazzoni dishwasher service is offered in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 755-5986 with the F8 code and the model.

Source: Bertazzoni DW24T3IXV / DW24T3IPV manual; Bertazzoni DW24T3IXT26 / DW24T3IPT26 manual; Bertazzoni DW18S2IXV / DW18S2IPV manual; Bertazzoni DW24T2IXB / DW24T2IPB manual; Bertazzoni DW24S3IPV manual

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Bertazzoni appliance?

Book a specialist visit for a clear estimate and approval before any repair.

References

Sources & references

Book your repair

Ready to get your Bertazzoni appliance working again?

Book online or call us — clear estimates, approval before any work, and a workmanship warranty on every completed repair.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair