Skip to content
Specialized Bertazzoni repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Bertazzoni Dishwasher F7 Code: Overheating

Error code F7 / F07
Appliance Dishwasher
Quick answer

F7 is overheating. The only printed step is to contact service.

Model compatibility: Bertazzoni reuses codes across series and model years, so F7 / F07 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

F7 means overheating on the dishwasher, and the manual lists contact service only.

For F7 (F07) Bertazzoni uses one word, overheating, and a short action beside it: contact service.

At a glance

Code F7 / F07
What it means F7 means something in the dishwasher overheated; the component is not identified.
What you can check Stop the cycle and switch the power off at the plug or breaker. Keep the door closed for a while, as steam and hot dishes are likely, and do not run another cycle.
When to call a technician Leave the dishwasher powered down and call for service. Mention any F6 or F8 that appeared too, since a technician must find the overheating cause.

Frequently asked

Which part got hot? The table does not say if it was the heater, the water or an electronic part.

Is it a fire hazard? The manual does not claim so. It handles overheating as a fault for service, and disconnecting is the cautious move.

Will a cool-down fix it? No cool-down or reset step is printed for F7.

What to do

  • Stop the cycle.
  • Switch the power off at the plug or breaker.
  • Keep the door closed for a while; steam and hot dishes are likely when it opens.
  • Do not reconnect before service has looked at it.

F6, F7 and F8 in the table

Code Fault
F6 Faulty heater sensor
F7 Overheating
F8 Heater error

One remedy covers the three. If more than one has appeared, tell service.

Reading the word overheating

It suggests that something inside the machine became hotter than it should have. The table does not identify the component, so nothing here claims one.

After the machine is disconnected

Do not run another cycle to see what happens. Leave the dishwasher powered down, with the door shut, until service has inspected it. If F6 or F8 appeared as well, include that in your report.

Compare

  • F6: the sensor side of the heating system
  • F8: the heater side

Dishwasher service by metro area

Bertazzoni dishwasher service covers the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 755-5986, give the F7 code and model number, and say that the machine is disconnected.

Source: Bertazzoni DW24T3IXV / DW24T3IPV manual; Bertazzoni DW24T3IXT26 / DW24T3IPT26 manual; Bertazzoni DW18S2IXV / DW18S2IPV manual; Bertazzoni DW24T2IXB / DW24T2IPB manual; Bertazzoni DW24S3IPV manual

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Bertazzoni appliance?

Book a specialist visit for a clear estimate and approval before any repair.

References

Sources & references

Book your repair

Ready to get your Bertazzoni appliance working again?

Book online or call us — clear estimates, approval before any work, and a workmanship warranty on every completed repair.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair