A Bertazzoni dishwasher raising F03 deserves a calm read of a possible water-level or pressure-sensing problem clues — not a rush to open sealed or live panels. Bertazzoni Appliance Repair can verify on site.
Reviewed by Marco Bellini · Last reviewed August 12, 2026
Written by
Marco Bellini Appliance Repair Content SpecialistPublished August 10, 2026Technically reviewed August 12, 2026
Content status:
Needs Technical Review — this entry is awaiting technical verification and should be confirmed before it is relied upon.
Error codeF03
ApplianceDishwasher
Affected model seriesSelect Bertazzoni electronic-control appliances (verify the code map for yours)
Quick answer
F03 · a level/pressure issue · Bertazzoni dishwasher — independent summary for homeowners.
Model compatibility: Bertazzoni reuses codes across series and model years, so F03 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Homeowners usually see F03 on a Bertazzoni dishwasher in connection with a possible water-level or pressure-sensing problem. Independent technicians still match the code to your serial family before ordering parts. Two Bertazzoni units can share a display string yet mean different subsystems; verify for your serial family.
Signs
Symptoms you may notice
The dishwasher shows F03 and over- or under-fills
The cycle stalls with F03 displayed
Water levels seem wrong when F03 appears
Why it happens
Possible causes
A pressure switch or level sensor
A blocked pressure hose or chamber
A control interpreting levels as a fault
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Check the accessible filter for blockages
Confirm drainage access is clear
Perform a manufacturer-approved restart
Keep notes on any recent power outages, filter changes, or installs before the visit
Important safety warning. Do not open internal panels, access high-voltage wiring, or bypass any safety device. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.
Please avoid
What not to attempt
Do not open internal panels or access high-voltage components
Do not bypass door locks, safety switches or interlocks
Do not keep running the appliance if there is water near electrical parts, a burning smell or sparks
Get help
When to call a technician
F03 that survives basic checks belongs with independent service. Bertazzoni Appliance Repair verifies the cause against your model documentation first.
Seeing this code on your Bertazzoni appliance?
Book a specialist visit for a clear estimate and approval before any repair. Independent service — not an official Bertazzoni service center.
Yes for a single reset after safe checks — no for repeated clears. Recurring F03 belongs with an independent technician at Bertazzoni Appliance Repair.
The same characters can map to different subsystems on different Bertazzoni controls. Always verify F03 against your unit’s documentation.
No. Bertazzoni Appliance Repair publishes independent repair guidance for homeowners. Use your Bertazzoni model manual for manufacturer wording, then book an independent technician if the fault continues.
References
Sources & references
Bertazzoni owner documentation — display codes and messages
