Reviewed by Bertazzoni Repair Editorial Team · Last reviewed August 12, 2026
Written by
Bertazzoni Repair Editorial Team Editorial TeamPublished August 10, 2026Updated October 28, 2026Technically reviewed August 12, 2026
Error codeE6
ApplianceDishwasher
Quick answer
Bertazzoni dishwasher E6: thermal sensor cut, an open circuit.
Model compatibility: Bertazzoni reuses codes across series and model years, so E6 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
The dishwasher board sees its thermal sensor as cut, an open circuit.
E6, sometimes printed E06, is the code Bertazzoni gives to a cut thermal sensor on its DW24PR and DW18PR dishwashers.
At a glance
Code
E6
What it means
The dishwasher board sees its thermal sensor as cut, an open circuit.
What you can check
There is no owner repair for E6. Cancel the program, leave the machine closed, and mention whether the hot water supply seemed normal when the code appeared.
When to call a technician
A technician should check the inlet water temperature, the thermistor and the control board, since those checks are not owner work.
How to picture it
An open circuit leaves no path for current, like a wire to the sensor that has snapped. That is how the control board interprets the reading.
Listed checks
Inlet water temperature
Thermistor
PCB
Those items are common to E7, where the sensor is read as shorted and current bypasses it.
Factory mode remark
Near these rows the table also reads “only appeared in the factory mode”. Which of them it describes is uncertain.
Owner role
The inlet water temperature is listed as the first thing to check, and a technician makes that check. Cancel the program, do not open the machine, and mention whether the hot supply seemed normal at the time. The baseline from the incoming water is what the sensor reading is compared against.
Related
E7: the short-circuit version of this sensor fault
E3: heating not reaching the set temperature in 90 minutes
Models and spelling
The code is printed in the DW24PR and DW18PR manuals. Some lists write it E06; it is the same code.
The open-versus-short distinction is the only difference between E6 and E7. Their checks match, so a technician starts in the same place for either.
Dishwasher sensor service in metro areas
Bertazzoni dishwasher sensor faults are handled in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 755-5986 with the E6 code and the model number; the dishwasher service page has more.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Bertazzoni appliance?
Book a specialist visit for a clear estimate and approval before any repair.