Skip to content
Specialized Bertazzoni repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Bertazzoni Dishwasher Error E1: Long Water Inlet

Error code E1
Appliance Dishwasher
Quick answer

A Bertazzoni dishwasher showing E1 took too long to fill. Check the faucet, intake and pressure.

Model compatibility: Bertazzoni reuses codes across series and model years, so E1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

E1 is a longer-than-expected water inlet: faucet not open, intake restricted, or water pressure too low.

A dishwasher watches the clock while it fills. E1 on a Bertazzoni unit means the fill ran long, and the manuals for the DW24XV, DW24PR and DW18PR describe it with the same rule.

At a glance

Code E1
What it means E1 is a longer-than-expected water inlet: faucet not open, intake restricted, or water pressure too low.
What you can check Fully open the water shut-off valve and restart the cycle. That is the only owner step for this code, so check it before anything else.
When to call a technician If the tap is open and E1 returns, a technician needs to review the water supply, inlet valve, flow meter, pressure switch and control board.

The 4-minute rule

Four minutes into the inlet step, if the flow meter has not picked up the defined quantity of water, the machine signals E1. You may see it written E01.

Cause and check

Listed cause What to look at
Faucet not open The supply shut-off valve
Water intake restricted The intake path
Water pressure too low The supply pressure

The DW24PR manual shows a water failure indicator on its display for the closed-faucet case.

What service reviews

  • the water supply, then the inlet valve
  • the inlet and the flow meter
  • the pressure switch and the drain
  • the PCB, last on the list

Owners can handle only the first step: fully open the shut-off valve and restart the cycle.

More dishwasher codes

  • E4: overflow, meaning a leak in the base
  • F3: water that keeps entering
  • FF: the inlet failure code on F-code models

Questions

Is E1 a leak? No. A leak is a different code; E1 is about water arriving too slowly or not at all within the allowed time.

Is a part named for the owner? The three listed causes concern the supply, not a component, and the seven-item list is for service.

Dishwasher service in metro areas

If the tap is open and E1 returns, phone (844) 755-5986. Bertazzoni dishwasher service covers the Miami, New York, Houston, Los Angeles and San Diego metro areas; the dishwasher service page lists what we do. Tell us the model and what you tried.

Source: Bertazzoni DW24XV Use & Care Manual; Bertazzoni DW24PR Use & Care Manual; Bertazzoni DW18PR Use & Care Manual

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Bertazzoni appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Book your repair

Ready to get your Bertazzoni appliance working again?

Book online or call us — clear estimates, approval before any work, and a workmanship warranty on every completed repair.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair