Bertazzoni Cooktop Code E4: Low Supply Voltage
A Bertazzoni cooktop showing E4 has found its supply voltage too low.
30" induction cooktop — model notes, common issues and related Bertazzoni cooktop service.
The first warning on an induction cooktop is frequently a pan that refuses to heat, even though the zone lights up. On the Bertazzoni PE304INDXV, that usually means the cookware is not magnetic enough or is too small for the zone it sits on. Try a pan you know is compatible, center it on the zone, and see whether the heat returns. If the touch controls flicker or one zone shows a code, wipe the glass dry and remove anything resting near the panel. Note the code and which zone it came from before you switch the cooktop off. Homes across the metro areas we cover use 30-inch cooktops like this in everyday cooking. In the booking form, describe the zone and the pan you tried, enter PE304INDXV as the model, and add the code.
| Model | PE304INDXV |
|---|---|
| Appliance | 30-inch induction cooktop |
| Common symptoms | Pan not heating though the zone lights, flickering touch controls, code on one zone |
| What you can check | Try a pan you know is compatible, centered on the zone. Wipe the glass dry, clear anything near the panel, and note the code before switching off. |
| When to call a technician | If a compatible pan still will not heat or the code returns, book a technician to check the zone and controls. |
PE304INDXV is a Bertazzoni 30″ induction cooktop. The model number is printed on the rating label, usually on the underside of the unit; many owners also have it on the warranty card or installation papers; match it letter for letter before booking, because a single letter can change parts.
| Dimensions | Nominal cooktop width is 30 inches. |
|---|---|
| Power | The center zone reaches 3,600 watts with boost. |
| Features | The manufacturer sheet lists four induction zones. Bridge operation is provided. |
| Controls | Controls use touch-through-glass sliders. Each zone supports timed cooking. There are nine power levels plus Boost. |
| Finish | The cooktop finish is black. |
The center zone is the one to know on this 30-inch induction cooktop, since its boost reaches 3,600 watts. Sliders sit behind the glass, so the controls work through the surface and wipe clean. Bridge mode links two zones for a long pan, and each zone can run its own timer, with nine power levels plus Boost covering everything from a simmer to a fast sear.
Cookware not detected is the first complaint technicians hear on this cooktop, so the pan should be magnetic and sized to the zone before a board is suspected. Touch sliders that flicker or lock out often come from moisture or a film of spill on the glass, which the owner can clear before calling. An error code on one zone points to the power section for that zone. Note whether bridge mode was on and which power level was set, then give the full model number from the rating label.
Check the rating label on the underside of the unit; many owners also have it on the warranty card or installation papers. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note which burner or zone fails and whether the others still work normally.
A Bertazzoni cooktop showing E4 has found its supply voltage too low.
On a Bertazzoni induction cooktop, E1 means the glass plate sensor is high. Cool it, then restart.
E5 flags a failed temperature sensor on a Bertazzoni induction cooktop.
A Bertazzoni cooktop with F4 has a failed mainboard temperature sensor.
Induction or electric cooktop not heating or responding? We diagnose Bertazzoni cooktop faults safely and precisely.
Note which burner or zone fails and whether the others still work normally.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.