Bertazzoni Cooktop Code F1: Board Connection Fault
F1 on a Bertazzoni cooktop is a communication failure between its display board and left mainboard.
24" induction cooktop — model notes, common issues and related Bertazzoni cooktop service.
Before you book a visit for the PE244INDXV, a few safe checks take only minutes. An induction cooktop heats only cookware that is magnetic, so if a zone shows no heat, test the pan with a magnet first. A pan that is too small for its zone may also go unrecognized. If the touch controls flicker or lock out, wipe the glass dry and remove any object resting on the panel, since moisture and clutter can trigger false inputs. Keep the Bertazzoni cooktop switched off while you check, and never open the unit or its wiring. Households in the metro areas we cover rely on this 24-inch size for smaller kitchens. In the booking form, record which zone is affected, enter PE244INDXV as the model, and list any code the display showed.
| Model | PE244INDXV |
|---|---|
| Appliance | 24-inch induction cooktop |
| Common symptoms | Zone with no heat, pan not recognized, flickering or locked-out touch controls |
| What you can check | Test the pan with a magnet, make sure it is not too small for the zone, and wipe the glass dry. Keep the cooktop off while checking and never open it. |
| When to call a technician | Get a technician if the zone stays dead or the controls keep locking out, since any wiring work is not for owners. |
PE244INDXV is a Bertazzoni 24″ induction cooktop. The model number is printed on the rating label, usually on the underside of the unit; many owners also have it on the warranty card or installation papers; match it letter for letter before booking, because a single letter can change parts.
| Dimensions | Nominal cooktop width is 24 inches. |
|---|---|
| Power | The back-left zone reaches 2,700 watts with boost. |
| Features | The manufacturer sheet lists four induction zones. Bridge operation is provided. |
| Controls | Controls use touch-through-glass sliders. Each zone supports timed cooking. There are nine power levels plus Boost. |
| Finish | The cooktop surface is black glass. |
Touch-through-glass sliders are the detail that sets this cooktop apart, since the controls sit under the black glass and leave no knobs to clean. Each zone runs its own timer, so a pan can cook to a set time while another zone keeps simmering. Nine power levels plus Boost give a wide range, and the back-left zone reaches 2,700 watts with boost for the hottest work.
A cookware-not-detected message on an induction cooktop often means the pan base is too thin or not magnetic, so test with a magnet first. A flickering slider or a lockout points to the glass surface, the control board or moisture, so clean and dry the surface before calling. An error code on one zone isolates the fault to that zone's coil or board, and a technician checks it with a meter. Keep the glass free of heavy scratches, since a damaged area can also affect the sliders.
Check the rating label on the underside of the unit; many owners also have it on the warranty card or installation papers. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note which burner or zone fails and whether the others still work normally.
F1 on a Bertazzoni cooktop is a communication failure between its display board and left mainboard.
Bertazzoni induction cooktop E2 points to a high IGBT sensor value; cooling and a restart is the listed step.
E3 on a Bertazzoni induction cooktop is a too-high supply voltage reading.
A Bertazzoni cooktop showing E4 has found its supply voltage too low.
Induction or electric cooktop not heating or responding? We diagnose Bertazzoni cooktop faults safely and precisely.
Note which burner or zone fails and whether the others still work normally.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.