F2 reports a Fresco zone sensor fault; the 24 inch refrigerator keeps cooling.
Model compatibility: Bertazzoni reuses codes across series and model years, so F2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Bertazzoni lists F2 as a Fresco zone sensor fault in its 24 inch built-in bottom-mount refrigerator manuals; the unit still cools.
These manuals call it a “Fault Display & Alarm” function. A sensor problem produces an alert on the temperature display. The same sentence appears in all three: the appliance still cools, and an engineer should check it. The label differs slightly, “Fresco sensor” in two and “Fresco Zone sensor” in the third.
At a glance
Code
F2
What it means
F2 is a fault in the Fresco zone sensor, and the refrigerator still cools.
What you can check
Record F2 and any other code shown. Test how cold the fresh food compartment is with a thermometer if you own one, and do not tamper with the sensor.
When to call a technician
The refrigerator still cools, but schedule a technician visit. If F2 appears with other sensor codes, give them all in the order shown.
Where the manuals stop
There is no explanation of where the Fresco zone is or what is stored there. For that, the technician can consult the documentation for your exact model.
Steps while waiting
Record F2 and whether any other code is shown.
Test the coldness of the fresh food compartment, with a thermometer if you own one.
Schedule a visit; do not tamper with the sensor.
When codes pile up
If F2 is accompanied by other sensor codes, copy all of them in order. A combination across sensors points a technician in a different direction from a lone code.
See also
F1 is the evaporator sensor (listed in the first manual) and F3 the fridge compartment sensor.
If F2 is not alone
Sensors may alarm in company. When F2 shares the display with F1, F3 or another sensor code, copy the codes down in the order shown; a spread over several sensors points a technician elsewhere than a single code does.
Refrigerator service in Miami, New York, Houston, Los Angeles and San Diego
Calls about 24 inch Bertazzoni refrigerators are taken for the Miami, New York, Houston, Los Angeles and San Diego metro areas at (844) 755-5986. Keep the model number, the F2 code and any other codes handy. Further reading: refrigerator repair.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Bertazzoni appliance?
Book a specialist visit for a clear estimate and approval before any repair.