F1: fridge evaporator sensor fault on the REF24BMBPNB; cooling continues.
Model compatibility: Bertazzoni reuses codes across series and model years, so F1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
F1 is the fridge evaporator sensor fault in the Bertazzoni REF24BMBPNB manual, and the refrigerator still cools.
The code F1 is defined in only one Bertazzoni manual we hold, for the REF24BMBPNB built-in bottom-mount refrigerator. Section 11, Fault Display, gives it as the first entry: fridge evaporator sensor.
At a glance
Code
F1
What it means
F1 is a fault in the fridge evaporator sensor, and the refrigerator still cools.
What you can check
Keep the refrigerator powered since it still cools, leave the interior panels in place, and note whether any other code is displayed.
When to call a technician
Cooling continues, but have a technician check the sensor. An early visit lets the technician start from a running refrigerator; report any other code you see.
In short
Item
Detail
Fault
Fridge evaporator sensor
Where shown
Temperature display
Cooling
Continues
Manufacturer’s advice
Call a professional service engineer to check it
Reset
None listed
Evaporator, briefly
This is the coil that gets cold to chill the fresh food compartment’s air; the sensor tells the control about it. The manual reports only that the sensor has a fault, without a cause.
Handling
Keep the refrigerator powered, because it still cools.
Leave the interior panels in place.
Report the code, noting whether anything else is displayed.
Why report early
Nothing stops working, which makes the fault easy to ignore. The manual nonetheless asks for a check, and an early visit means the technician starts from a refrigerator that is still running.
Companion codes
Next to F1 in the list: F3 (fridge compartment) and F2 (Fresco zone).
What the list’s introduction says
The paragraph above the list says sensor faults are announced on the temperature display. Its one recommendation: cooling is unaffected, and a professional service engineer ought to inspect the refrigerator.
Another sensor code from that list is F5, the freezer evaporator sensor.
Refrigerator repair in Miami, New York, Houston, Los Angeles and San Diego
For repair requests in the Miami, New York, Houston, Los Angeles and San Diego metro areas, use (844) 755-5986. State F1, the model number on the nameplate and whether any other code appears. You can read the refrigerator repair page as well.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Bertazzoni appliance?
Book a specialist visit for a clear estimate and approval before any repair.