Skip to content
Specialized Bertazzoni repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Bertazzoni Refrigerator EH Code: Humidity Sensor Fault

Error code EH
Appliance Refrigerator
Quick answer

The humidity sensor has failed when EH shows on a 36 inch Bertazzoni refrigerator.

Model compatibility: Bertazzoni reuses codes across series and model years, so EH may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Bertazzoni lists EH as a humidity sensor failure on its 36 inch refrigerators and says to contact service.

Short definition

EH = humidity sensor failure. REF36FDFZXNT, REF36FDFIXNV / IXNB and RFD36FZNX / RFD36FZNW manuals all agree on it, wording it as “has failed,” “error” or “fault.”

At a glance

Code EH
What it means EH means the humidity sensor has failed.
What you can check Press any button to mute the chime on ice maker models, copy down every code that cycles, and check that the compartments and freezer stay cold.
When to call a technician Book a technician visit. Report warmer food or a second code when you call, even though cooling and freezing usually continue while EH shows.

What the manuals leave out

  • Where the sensor is located.
  • What it controls.
  • Any link between EH and the crisper drawer humidity control described in the REF36FDFZXNT manual.

So the only safe statement is that this input has stopped reporting properly.

Can the refrigerator stay on?

According to two of the three manuals, it still cools and freezes while these codes are displayed, but the user should contact the service technician or maintenance personnel. Removing food is not mentioned.

Practical handling

  1. If the chime is going on the 36 inch ice maker model, press any button.
  2. When more than one code cycles, copy every one of them.
  3. Do not look for a reset; none is listed.
  4. Tell the technician about any other change, such as warmer food.

Related

Other sensor entries in the lists: E7 for ambient temperature and E2 for the freezer compartment sensor.

While you wait for the visit

Check that the compartments stay cold, that the freezer holds its temperature and that no new codes start cycling. Warm food or a second code is worth reporting when you book. The refrigerator compartment sensor code E1 is another entry in these lists.

Refrigerator service in Miami, New York, Houston, Los Angeles and San Diego

Service for Bertazzoni refrigerators is handled in the Miami, New York, Houston, Los Angeles and San Diego metro areas through (844) 755-5986. Have the model number and every code shown ready. Browse the refrigerator repair page too.

Source: Bertazzoni REF36FDFZXNT refrigerator manual; Bertazzoni REF36FDFIXNV / IXNB refrigerator manual; Bertazzoni RFD36FZNX / RFD36FZNW refrigerator manual

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Bertazzoni appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Book your repair

Ready to get your Bertazzoni appliance working again?

Book online or call us — clear estimates, approval before any work, and a workmanship warranty on every completed repair.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair