Skip to content
Specialized Bertazzoni repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Bertazzoni REF24BMBPNB F1 Code: Evaporator Sensor

Error code F1
Appliance Refrigerator
Quick answer

F1: fridge evaporator sensor fault on the REF24BMBPNB; cooling continues.

Model compatibility: Bertazzoni reuses codes across series and model years, so F1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

F1 is the fridge evaporator sensor fault in the Bertazzoni REF24BMBPNB manual, and the refrigerator still cools.

The code F1 is defined in only one Bertazzoni manual we hold, for the REF24BMBPNB built-in bottom-mount refrigerator. Section 11, Fault Display, gives it as the first entry: fridge evaporator sensor.

At a glance

Code F1
What it means F1 is a fault in the fridge evaporator sensor, and the refrigerator still cools.
What you can check Keep the refrigerator powered since it still cools, leave the interior panels in place, and note whether any other code is displayed.
When to call a technician Cooling continues, but have a technician check the sensor. An early visit lets the technician start from a running refrigerator; report any other code you see.

In short

Item Detail
Fault Fridge evaporator sensor
Where shown Temperature display
Cooling Continues
Manufacturer’s advice Call a professional service engineer to check it
Reset None listed

Evaporator, briefly

This is the coil that gets cold to chill the fresh food compartment’s air; the sensor tells the control about it. The manual reports only that the sensor has a fault, without a cause.

Handling

  1. Keep the refrigerator powered, because it still cools.
  2. Leave the interior panels in place.
  3. Report the code, noting whether anything else is displayed.

Why report early

Nothing stops working, which makes the fault easy to ignore. The manual nonetheless asks for a check, and an early visit means the technician starts from a refrigerator that is still running.

Companion codes

Next to F1 in the list: F3 (fridge compartment) and F2 (Fresco zone).

What the list’s introduction says

The paragraph above the list says sensor faults are announced on the temperature display. Its one recommendation: cooling is unaffected, and a professional service engineer ought to inspect the refrigerator.

Another sensor code from that list is F5, the freezer evaporator sensor.

Refrigerator repair in Miami, New York, Houston, Los Angeles and San Diego

For repair requests in the Miami, New York, Houston, Los Angeles and San Diego metro areas, use (844) 755-5986. State F1, the model number on the nameplate and whether any other code appears. You can read the refrigerator repair page as well.

Source: Bertazzoni REF24BMBPNB refrigerator manual

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Bertazzoni appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Book your repair

Ready to get your Bertazzoni appliance working again?

Book online or call us — clear estimates, approval before any work, and a workmanship warranty on every completed repair.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book a Repair