Bertazzoni Appliance Repair techs treat E03 on a Bertazzoni refrigerator as a a possible temperature-sensing problem starting point, then verify against your model sheet.
Reviewed by Marco Bellini · Last reviewed August 12, 2026
Written by
Marco Bellini Appliance Repair Content SpecialistPublished August 10, 2026Technically reviewed August 12, 2026
Content status:
Needs Technical Review — this entry is awaiting technical verification and should be confirmed before it is relied upon.
Error codeE03
ApplianceRefrigerator
Affected model seriesBertazzoni Refrigerator series with on-display diagnostics (model-dependent)
Quick answer
E03 — commonly associated with a temperature-sensor issue on a Bertazzoni refrigerator. Meaning can vary by model; verify before relying on it.
Model compatibility: Bertazzoni reuses codes across series and model years, so E03 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
On many Bertazzoni refrigerator models, E03 is commonly tied to a possible temperature-sensing problem. Series and control generations differ — confirm the wording in your model documentation before acting. Treat this as independent homeowner guidance from Bertazzoni Appliance Repair, not a substitute for model-specific service literature.
Signs
Symptoms you may notice
The refrigerator displays E03 and temperatures seem off
E03 appears intermittently during operation
The refrigerator behaves inconsistently with E03 shown
Why it happens
Possible causes
A temperature sensor reading out of range
A wiring or connection issue to the sensor
A control interpreting the reading as a fault
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Confirm nothing is blocking internal vents or airflow
Note the actual behavior or temperatures if measurable
Perform a manufacturer-approved restart
Keep notes on any recent power outages, filter changes, or installs before the visit
Important safety warning. Do not open internal panels, access high-voltage wiring, or bypass any safety device. Never open the sealed cooling or refrigerant system — this must be handled by a certified technician. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.
Please avoid
What not to attempt
Do not open internal panels or access high-voltage components
Do not open or attempt to recharge the sealed refrigerant system
Do not bypass door locks, safety switches or interlocks
Do not keep running the appliance if there is water near electrical parts, a burning smell or sparks
Get help
When to call a technician
When E03 returns after one careful reset, pause DIY cycling and schedule Bertazzoni Appliance Repair. Bring photos of the code and the rating plate.
Seeing this code on your Bertazzoni appliance?
Book a specialist visit for a clear estimate and approval before any repair. Independent service — not an official Bertazzoni service center.
Yes for a single reset after safe checks — no for repeated clears. Recurring E03 belongs with an independent technician at Bertazzoni Appliance Repair.
If two manuals disagree about E03, trust the literature for your exact model — then book independent help if the fault continues.
No. Bertazzoni Appliance Repair publishes independent repair guidance for homeowners. Use your Bertazzoni model manual for manufacturer wording, then book an independent technician if the fault continues.
References
Sources & references
Bertazzoni use-and-care guide for your model — fault indicators
