Bertazzoni Cooktop Code E4: Low Supply Voltage
A Bertazzoni cooktop showing E4 has found its supply voltage too low.
30" gas cooktop from the Professional Series line — model notes, common issues and related Bertazzoni cooktop service.
Two gas cooktops of the same width can differ in burner layout, igniter placement and control board, which is why the exact model number matters for the Bertazzoni PROF304QBXT. A 30-inch Professional Series unit may show an error code tied to one zone, controls that respond only some of the time, or a burner that refuses to heat. Each symptom points to a different part of the cooktop, so before booking, write down the code, note which burner is involved, and check that the burner is seated correctly. Do not cover the burners with foil or set heavy objects on the grates, since that can block flow and hide the real fault. In the booking form, enter PROF304QBXT as the model number, the affected burner, and any code on the display.
| Model | PROF304QBXT |
|---|---|
| Appliance | 30-inch gas cooktop |
| Common symptoms | Error code on one zone, controls responding only sometimes, burner refusing to heat |
| What you can check | Write down the code, note which burner is involved, and check that burner is seated correctly. Do not cover burners with foil or load the grates. |
| When to call a technician | A burner that still refuses to heat or a code that keeps returning needs a technician, since each symptom points to a different part. |
PROF304QBXT is a Bertazzoni 30″ gas cooktop from the Professional Series line. The model number is printed on the rating label, usually on the underside of the unit; many owners also have it on the warranty card or installation papers; match it letter for letter before booking, because a single letter can change parts.
| Dimensions | Nominal cooktop width is 30 inches. |
|---|---|
| Power | The natural-gas power burner is rated at 17,000 BTU. |
| Installation | An LPG conversion kit is included. |
| Features | The cooktop has four brass burners. The grates are cast iron. Ignition includes thermocouple safety protection. A wok ring is included. |
| Finish | The exterior is stainless steel. |
Brass burners on a low-edge cooktop with four positions suit a counter that needs a lower profile. The natural-gas power burner is rated at 17,000 BTU, and a wok ring keeps round-bottomed pans steady. The LPG conversion kit is in the box, so fuel can change without replacing the cooktop.
A burner that goes out after lighting is a thermocouple concern, since the safety device cuts gas flow when the flame drops. Check the burner cap seating and the igniter tip before replacing a valve, and note which position is affected and when the trouble started. Error codes on a single zone are read from the control, and touch controls that flicker get moisture checks. Give the complete number from the rating label, and state whether the unit runs natural gas or LPG so the correct orifice is installed.
Check the rating label on the underside of the unit; many owners also have it on the warranty card or installation papers. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note which burner or zone fails and whether the others still work normally.
A Bertazzoni cooktop showing E4 has found its supply voltage too low.
On a Bertazzoni induction cooktop, E1 means the glass plate sensor is high. Cool it, then restart.
A Bertazzoni cooktop with F4 has a failed mainboard temperature sensor.
F1 on a Bertazzoni cooktop is a communication failure between its display board and left mainboard.
Induction or electric cooktop not heating or responding? We diagnose Bertazzoni cooktop faults safely and precisely.
Note which burner or zone fails and whether the others still work normally.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.