E07 is a Bertazzoni wine cooler diagnostic usually grouped with a possible cooling-performance problem. This page keeps DIY limits clear; recurring faults belong with an independent technician at Bertazzoni Appliance Repair.
Reviewed by Marco Bellini · Last reviewed August 12, 2026
Written by
Marco Bellini Appliance Repair Content SpecialistPublished August 12, 2026Technically reviewed August 12, 2026
Content status:
Needs Technical Review — this entry is awaiting technical verification and should be confirmed before it is relied upon.
Error codeE07
ApplianceWine Cooler
Affected model seriesSelect Bertazzoni electronic-control appliances (verify the code map for yours)
Quick answer
E07 · a cooling issue · Bertazzoni wine cooler — independent summary for homeowners.
Model compatibility: Bertazzoni reuses codes across series and model years, so E07 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Bertazzoni wine cooler controls may raise E07 when a possible cooling-performance problem is involved. Record the full model number; the same characters can map differently across years. If your manual lists a different description for this code, trust the manual over any general summary.
Signs
Symptoms you may notice
The wine cooler shows E07 and cooling seems off
Temperatures drift while E07 is displayed
E07 appears alongside unusual cooling behavior
Why it happens
Possible causes
A cooling-performance issue (varies by model)
A sensor or control affecting cooling
Airflow or door-seal problems reducing performance
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Confirm the vents inside are not blocked by items
Confirm the door seals and closes properly
Note actual temperatures if you can measure them
Record the full Bertazzoni model and serial numbers before contacting a technician
Important safety warning. Do not open internal panels, access high-voltage wiring, or bypass any safety device. Never open the sealed cooling or refrigerant system — this must be handled by a certified technician. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.
Please avoid
What not to attempt
Do not open internal panels or access high-voltage components
Do not open or attempt to recharge the sealed refrigerant system
Do not bypass door locks, safety switches or interlocks
Do not keep running the appliance if there is water near electrical parts, a burning smell or sparks
Get help
When to call a technician
Recurring E07 is a signal to stop homeowner experiments. Bertazzoni Appliance Repair can test the fault path safely and give a written estimate before parts.
Seeing this code on your Bertazzoni appliance?
Book a specialist visit for a clear estimate and approval before any repair. Independent service — not an official Bertazzoni service center.
Clearing the display is fine once notes are saved — it is not a repair. When E07 comes back on the next use, contact Bertazzoni Appliance Repair.
If two manuals disagree about E07, trust the literature for your exact model — then book independent help if the fault continues.
No. Bertazzoni Appliance Repair publishes independent repair guidance for homeowners. Use your Bertazzoni model manual for manufacturer wording, then book an independent technician if the fault continues.
References
Sources & references
Model-specific Bertazzoni manual — confirm the exact code wording
