Bertazzoni microwave owners see E12 when a possible sensor-related problem is in play. Use this guide, then schedule diagnosis with Bertazzoni Appliance Repair if it returns.
Reviewed by Marco Bellini · Last reviewed August 12, 2026
Written by
Marco Bellini Appliance Repair Content SpecialistPublished August 12, 2026Technically reviewed August 12, 2026
Content status:
Needs Technical Review — this entry is awaiting technical verification and should be confirmed before it is relied upon.
Error codeE12
ApplianceMicrowave
Affected model seriesBertazzoni appliances with electronic diagnostic displays (confirm your model)
Quick answer
E12 · a sensor issue · Bertazzoni microwave — independent summary for homeowners.
Model compatibility: Bertazzoni reuses codes across series and model years, so E12 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Bertazzoni microwave controls may raise E12 when a possible sensor-related problem is involved. Record the full model number; the same characters can map differently across years. Bertazzoni Appliance Repair uses the code as a starting clue; final diagnosis still follows your appliance’s documentation.
Signs
Symptoms you may notice
The microwave displays E12 during operation
E12 appears without an obvious cause
The microwave behaves inconsistently with E12 shown
Why it happens
Possible causes
A sensor reading out of range
A wiring or connection issue
A control interpreting the reading as a fault
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Confirm the appliance has stable power
Check for visible blockages or obstructions
Record the full model number
Write down when E12 appeared and which cycle or mode was running
Important safety warning. Do not open internal panels, access high-voltage wiring, or bypass any safety device. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.
Please avoid
What not to attempt
Do not open internal panels or access high-voltage components
Do not bypass door locks, safety switches or interlocks
Do not keep running the appliance if there is water near electrical parts, a burning smell or sparks
Get help
When to call a technician
If you are unsure at any point with E12 on screen, contact Bertazzoni Appliance Repair for on-site confirmation rather than opening panels yourself.
Seeing this code on your Bertazzoni appliance?
Book a specialist visit for a clear estimate and approval before any repair. Independent service — not an official Bertazzoni service center.
Yes for a single reset after safe checks — no for repeated clears. Recurring E12 belongs with an independent technician at Bertazzoni Appliance Repair.
No single dictionary covers every Bertazzoni microwave. Bertazzoni Appliance Repair matches the display to your model sheet during diagnosis.
No. Bertazzoni Appliance Repair publishes independent repair guidance for homeowners. Use your Bertazzoni model manual for manufacturer wording, then book an independent technician if the fault continues.
References
Sources & references
Bertazzoni appliance user manual — error/display messages section
